Hoist Measurement
Pull tape measure to the top of the forestay if it is a furling system please attach to the swivel car.
|
|
A/ |
Measure to the intersection of the forestay and deck. |
|
B/ |
Measure to the bearing surface of the tack fitting. |
|
C/ |
Measure to the feeder if applicable. |
|
D/ |
Pass tape around shrouds as if leech of the sail and measure to the most aft point of the track. |
|
E/ |
Then repeat the above procedure but to the most forward point
of the track. |
|
F/ |
Measure from the max hoist to the shrouds at deck level. |
|
G/ |
Measure from max hoist to the top of the deck at the mast. |
|
|
| Deck Measurements |
|
H/ |
From the tack fitting to the Forward edge of track. |
|
I/ |
From the tack fitting to the aft edge of track. |
|
J/ |
From the tack fitting to the leading edge of mast. |
*(must complete)